Breakthrough material for printed solar cells

​The TU patented a new cheap base material for semi-organic perovskite solar cells. “This is going to be consequential.”
The new material has an impossible name (EDOT-OMeTPA) but it carries the promise of cheap printable solar cells of just 0,2 microns thick with an efficiency of 11 percent.

“Our synthesis brings commercial applications within reach”, says Professor Theo Dingemans who develops polymers and new materials at the Faculty of Aeronautical Engineering. “It’s up to designers to find applications for it. Wearable electronics could be one, you could print a solar panel on your tent or even on wood panels.”

The material that Dingemans and his team developed forms a hole-transporting layer that functions very well with semi-organic perovskite solar cells. Synthetic perovskites (named after the Russian mineralogist L.A. Perovski) are crystallised metal-organic materials that are cheap to produce and easy to manufacture. They offer many interesting and intriguing properties, one of which is photovoltaics.

The perovskite solar cells have shown an efficiency of 11 %, which makes them a serious alternative for silicon solar cells (with efficiencies between 15 and 35 percent). “Perovskites have long been regarded as the ugly duck of photovoltaics. But the current technology is going to be consequential. These cells will be applied”, said Dingemans.

Work remains to be done on packaging (perovskite cells are not waterproof) and on stability (improving the lifetime over 1.000 hours). Replacing the lead ions with tin would be an environmental improvement. Start-ups are busy designing industrial production lines.

Dingemans expects printable perovskite solar cells to pop up in disposable applications first. In the longer term, he’d like to make structural polymers, such as used in airplanes and satellites, energy-producing. After eight years of development, Dingemans is convinced that perovskite PV is now on its way from the lab to applications.

Editor Redactie

Do you have a question or comment about this article?

Comments are closed.